Stinging Nettles.

Stinging nettles; I have spent years pulling these out of my garden, and now I find I have a little patch of ground saved where I grow them for plant dyes. Strange how things work out!

NettlesNettles are a common weed, found in moist areas in Europe, Asia and North America. The plants  are perennial, and can grow up to four feet in height. The leaves and stems are very hairy, and are covered in both stinging and non-stinging hairs. The stinging hairs break off in the skin when touched, and inject a variety of chemicals into the skin which cause a painful reaction. Traditionally the sap from a dock leaf will ease the pain form a nettle sting.

‘Dock in, Nettle out,
Dock rub nettle out’

Nettle can be used to make a soup. It also can be used as a plant fertiliser.
But for me, nettle leaves make a lovely green dye. With  an iron mordant, the dye supposedly  turns black; copper produces a lovely grey-green (like for camouflage), and the roots can be boiled with alum for a nice yellow dye.

I had run out of green wool, so I decided that I’d use the nettle in the garden to make some dye up. I gathered 900g of nettles. I tried to use mainly the leaves and non-woody stems. One tip here; wear long sleeves and gloves. They sting like crazy, and the stinging sensation seems to remain, even after using dock leaves!

I chopped the nettles up quite so they fitted better into the pot, added rainwater, and left to soak for several days.

NettlesTo help break down the plant fibres, and to extract more dye, I simmered the pot each day for about 20 minutes. I drained the dye from the pot and re-covered the nettles ( I was trying to get as much dye from the crop as possible). This new batch of nettle dye-stuff I left for another day and then I drained that dye into the original batch.

As usual I had mordanted my wool with alum. I added 200g of the mordanted wool to the pot. This was a ratio of 4:1. dye stuff to wool.

Nettles added to dye potIt appeared to turn a yellow/green colour. To be honest, it didn’t look very promising. Anyway I brought the pot to the boil and simmered it for an hour. The resultant wool was green/yellow in appearance.

Nettle with Alum MordantIt was actually a pretty nice colour, but I wanted a green; full on, in your face green! So I added two teaspoons copper sulphate to the dye bath. And got……….

Nettle with Alum and Copper Mordant - 1st dye bathGreen!!!! Lovely colour, just what I wanted, and very like the colour from last year. And just to use the last of the dye bath, I added another 200g of alum mordanted wool and a teaspoon of copper to the bath. This is the result from that bath.

Nettle with Alum and Copper Mordant - 2nd dye bathThis wool is more of a brown/green, and again is like the colours from the dye last year.

Have fun with the nettles; just be careful of the stings!

Advertisements

Red Onions to dye……..

So you might remember that I blogged about dyeing with the skins of white onions back in February; they have the gold/yellow papery skins. I had added a copper mordant to the dye pot at the end in an attempt to create a deeper, richer colour. The photo below shows the result from then.
The yellow colour was from dyeing the wool for one hour in an onion dye stuff; the deeper brown colour was created after adding the copper mordant.

1-DSCF2979After posting it, a reader commented that if I had used red onion skins, I would have gotten the same results. Nothing like a bit of experimentation……..

I tried to keep the red onion dye prep as close to the original. I used the same method I had used for the plain onion skins. I use one third the weight of the wool in skins; 33g of skins per 100g of wool. I also used the same wool type and water source.
I boiled the skins in rain water to get the dye stuff.

1-DSCF3357After simmering for an hour, I drained the water off the skins and used this as my dye.
When I added the wool I got

1-DSCF3362

1-DSCF3364I have to say that it looked quite promising. After simmering for an hour I got the following results.1-DSCF3378 1-DSCF34001-DSCF3382They are really lovely colours. The question was did the red onions give the same colour as the plain onions with a copper mordant?

To me the answer has to be no; at least not in this case. The copper mordant seemed to have dyed the wool a deeper shade of brown, whereas the red onion skins gave a deeper gold yellow. But to be honest, both dyeing attempts gave beautiful colours…. Now to start saving skins all over again…….

Ivy as a Natural Dye Material

1-DSCF3347

Ivy; there’s tons of it growing over my yard wall, and Bob had asked what colours we would get with the leaves and berries. So I decided to give it a go.

1-DSCF3350

I had tried this a couple of months ago without the berries. But this time I wanted to include them so I needed to wait until they had ripened. I hadn’t taken any photos last time, but the results were much the same.

I used the same procedure as with the other dyestuffs; twice the weight of dye material to wool. Also I let the twigs, leaves and berries soak for a week to get the maximum amount of dye in the pot.

1-DSCF3351

As usual I had pre-mordanted the wool with Alum. I wanted to dye 300g of Aran weight wool.
When I added the wool initially there was no significant change to the colour.

1-DSCF3356

After an hour, there was a definite change in colour, but not the green I had hoped for. Instead I got a yellow; nice but not what I had wanted.

1-DSCF3359

So I added copper sulphate to the pot (2 teaspoons per 100g wool), and continued to simmer for a further hour. This gave a better result. It’s green, but still not the green I had wanted. In real life it’s a slightly darker; below is a photo I took in natural daylight the following day, after the wool had dried.

1-DSCF3398

Last year using the same ivy plant I got a great green that I used in a hat for Bob. This was a different type of wool, and a different year, so that may account for the difference. My little nettle patch is growing, so I plan on trying those for a green……..

Blackberries………… to dye for!

1-blackberriesSo it’s spring, and like all good 21st century vikings I recently did a quick spring clean; well actually I had to defrost my freezer as it had become very badly iced over!
Anyway, while cleaning out the drawers I came across a box of frozen blackberries. I had bought them with the intention of making a Blackberry Crumble but must have forgotten them. They had passed their sell-by date by quite a long time, and so with the principle of waste not want not, I decided to use them to dye some wool. At the same time I could justify using another fruit as a dye stuff.

I had previously mordanted some wool with Alum.

1-DSCF3197

As in the previous dye experiments, I was so hopeful when I added the wool to the dye-bath; it looked like I was going to get a beautiful rose pink.

1-DSCF3200

But as in the previous experiments, what you initially appear to get is not always what you end up with . This time we got a blue/gray (the photos don’t show the colour exactly)!

1-DSCF3202 1-DSCF3204-001

So there we are; another dye experiment completed.
Quite a nice colour, quite similar to the one I got from elderberries, but to be honest I might use the blackberries for the crumble next time………………

An unexpected blue!!

This dyeing lark can becoming a bit addictive!! Since I started I find myself looking at plants in a whole new light; where before I thought about texture, colour and where the plant would fit in my garden, I now find myself looking at a plant and wondering what colour would it give to my wool? This now also seems to apply to the vegetables I cook!

1-DSCF3167

After my beetroot experiments. someone mentioned red cabbage as another plant that gives unexpected results. Naturally I had to give it a go, so I went back to the greengrocer (he really is a lovely man) and got some cabbage.

While I have no proof that the vikings would have used red cabbage as a dye stuff, it is another example of a colour which my be achieved from using natural dyes.

I used the same principle as the beetroot (twice the weight of dye material to the weight of wool), and the same method of preparing the dyebath.

1-DSCF3169
I used some wool that I had mordanted with alum before, and when I first added the wool I was quite hopeful of getting a pinky rose colour; it looked quite promising.

1-DSCF3173

But one thing that natural dyeing has taught me is that things are seldom as they appear; after half an hour the wool had changed colour again…….. to a more slate blue.

1-DSCF3174

After simmering for an hour, washing and rinsing, here’s what I got…………….. blue! A very nice blue.

It’s another good colour to add to the previous ones.

However I have been told that red cabbage is not completely light fast (and that it may fade in colour). I’ll just have to keep an eye on it and see if that’s true or not.

Now, what else have I lying in my fridge?

Beetroot……..not what you might expect!

Beetroot stains………everything! It stains chopping boards, fingers, dishcloths and white cotton material a deep crimsony red. So as a natural dyer you’d be forgiven for thinking that you wouldd get that colour if you dyed wool with beetroot. Sorry guys – not gonna happen.

I figured the best way to show this would be to dye some wool with beetroot and share my results.

First thing to do was to get some beetroot, so I headed back to friendly greengrocer and bought some.
All the literature I had read suggested twice the weight of dye material to weight of wool. However I wasn’t feeling overly confident about this project, so I bought 900g beetroots to dye 300g of wool.

1-DSCF3144
After a quick wash, the wonderful colour was more apparent….. maybe it would work; after all my fingers were now red!

1-DSCF3150

I chopped the beetroot up, covered with rain water and boiled for an hour. I use rainwater as it is more natural than the tap water in my area.
Then to extract as much dye as possible, I drained that off, re-covered the beetroot and repeated the process. In the pot the water had turn a wonderful shade of crimson.

1-DSCF3151
In a previous post about mordants, I had commented that some dye materials do not stick to the wool. Beetroot is one of these.  So I decided to do a little experiment; dye one hank in the half the dye-bath with un-mordanted wool. It looked so promising, however as soon as I took the wool out of the pot the colour went; I now had a very pale beige colour.
One thing I should point out is that the photographs are not exact replicas of the colours I’ve achieved, but they should give an indication of what happened.

1-DSCF3153 1-DSCF3154

It wasn’t a colour that really appealed to me. Anyway, after boiling for another hour, I got this;

1-DSCF3157

It’s a very pale beige colour. And there you have it; dye extracted from beetroot will not stick to wool that is not mordanted.
But would a mordant make much, if any, difference?

I’d already mordanted some wool and I added that to the dye-bath. Still no vivid red, but at this stage any colour would have been good; this looked more promising.

1-DSCF3158

When I took the wool out of the pot, the colour held. Not the brilliant red one would expect from beetroot, but a soft peachy gold colour.

1-DSCF3161

I left the wool simmering in the pot for an hour. I let the wool cool, then rinsed it through in cool water. When i was finished I had two hanks of peach gold wool. They’re quite a nice colour actually.

1-DSCF3163

As a comparison, this is a photo of the mordanted and unmordanted wool together. The colours in the photo are not as true to life as I’d like them, but I think they give an idea of the colours achieved and the need for a mordant if using beetroot as a dye-stuff.

1-DSCF3165

This was quite fun to do.
As a dye material, beetroot will not give you a vivid red (unfortunately) but it will give a rather nice peach gold colour. Would I use it again – yes!

Nalbinding; getting started with the Oslo stitch.

So you’ve decided to do some nalbinding. But where do you start?

Many of the videos that I have found are excellent for demonstrating the actual stitches, but they have complicated descriptions of ways of making the starting loops. I found these videos quite confusing when I was starting, so I tried to find other ways to make that first stitch. Through trial and error, I found a way that suited me.
This is what I do; I’m not saying that this is the only way, but it’s what I find easiest.

First you need to cut a piece of yarn approximately 1m long (about two arm-lengths). You can use longer, but for a beginner using longer lengths can make the nalbinding more awkward.
Thread the yarn through your needle, keeping the two ends at different length.

For description purposes, the working end is the end of the yarn that is attached to the needle, and the free end is the other.
Put the needle down for a moment.

Make a loose knot in the yarn, and place the knot loop on the pad of your thumb.

01-1

Take the knotted yarn loosely between your thumb and index finger, so the working end runs between the left thumb and forefinger, and lies across the thumb. NB the working end must run between your thumb and forefinger! The loop sitting up behind your thumb is what is referred to as the halo stitch.

02-006

Now using your needle, pass the needle through the halo loop from the back towards you. Then continue the needle under the working length of yarn lying between your thumb and index finger at the cross over point.
This will work best if you come from the side of the loop instead of the top of it.

06-010 08-012

 The aim is to create another loop that runs across the front of your thumb. Pull the needle and yarn slowly through keeping a light hold on the stitches, until there is a loop around the front of your thumb. The loop around the front of your thumb is your working loop. You have now created a basic stitch to begin with.

10-014

So far so good (I hope!).

Now for the first Oslo stitch. Pass the needle through the halo away from you.

01-7

Do not push the needle the whole way through the halo, but twist the needle round so the point passes back down under the working loop and the long piece of yarn at the cross over point. The easiest way to do this is on the pad at the back of your thumb. You can move your index finger slightly back out of the way until you have the needle in place.

03-9  02-8

Then lightly hold the cross over point between your index finger and thumb, and pull your needle and yarn through. You will now have two loops on your thumb, with the newest loop closer to your nail bed.

04-10

Push the older loop off the end of your thumb to create your new halo loop, keeping the newer loop on your thumb to create your new working loop.

05-11

You now have two loops at the back of your thumb. If you are unsure of which  is the halo and which is the working stitch, pull the working yarn and the working loop will tighten.

06-12

Continue these steps in this section to create a chain, picking up each new halo away from you, and twisting the needle back down through the working loop and under the working end of the yarn.
The chain length will depend on what you want to make. In my example I have done 25 stitches, but for a bag you will probably need more. You can make the chain as long as you need for the opening of the bag or hat. The chain can look ‘messy’ as you create it. (To smooth it out, take both ends and pull gently and the stitches will even out.

07-13

When you have the length of chain you need, you will have to join the ends in a circle. The chain should be straight and not twisted. Bring the free end of the chain round to meet the needle end. Pick the first stitch up by passing the needle away from you through it.Do not push the needle the whole way through. (This will be the connection stitch. As the connection stitch is picked up front-to-back the connection is termed F1).

08-14

After you have picked up the connection stitch, make the Oslo stitch as described above; with the connection stitch on the needle, continue to pass the needle through the halo away from you, twist the needle back and down through the working stitch and the working end of the yarn as you did for the chain Oslo stitch.

09-15

Continue by picking up the second stitch on the original chain and working a basic Oslo stitch.

                                  10-16

As you continue working, the nalbinded piece will work up into a tube. This is my basic method for starting hats,mittens and bags.

11-17

So that’s my way of starting nalbinding with the Oslo stitch.

If I want to use a stitch that requires more than one halo loop, then I just pick up more as I go along; first two stitches for Mammen, three for Broden and so on. I find that this also gives a graduated start to the piece as opposed to a block end effect.

I use videos to help me learn the stitches. This link is to the best site I found for video instructions.

Happy nalbinding! And remember – practice and perseverance.